Gate - Diagonal Cross Beam -
Refer to Fig. 10. Find point D1. Measure down 2 ½"
(6.35cm) and mark point D2. Locate point D3. Using a yardstick,
lightly draw a diagonal line (Line DB) connecting points D2
and D3. Do not draw over the pickets already painted. Pencil
marks should only be in the background areas. Print B4 is
aligned on Line DB and flush with the left side of the pickets
as shown in the illustration. Line up and secure the stencil,
then roll with white paint. Do this for the four center spaces.
The two outer spaces are only partial pieces. Using "Easy
Mask" tape, mask off the horizontal cross pieces in those
spaces before rolling these last two cross beam sections.
All of the white painting for the gate is now complete. |
|
The Gate is now complete.
|
