How To Care for your Industrial Stencils
With proper Care and Cleaning of your Industrial Stencils, they can be used almost forever.
We will talk about cleaning and storing stencils to get the maximum usage out of them.
Before Use:
- Unroll and allow stencils to "relax" and lay flat. If they have been stored for a long time in a rolled format they can take a few hours to flatten completely. Putting them on warm pavement in the sun or in a warm room will speed up the process.
- Prior to use apply silicone spray on the top surface. In general the LLDPE plastic we use is not an easy surface for paint to adhere to. Silicon spray will make the stencil even less receptive to holding paint.
- Spray the paint where it needs to go. Not on the stencil. All the paint on the stencil is wasted and is costing you money. We recommend using a narrower nozzle then the standard 4 inch line nozzle. Get a wand so that you can get the proper spray width without beding over.
Stencils can carry a lot of paint and are still useable. But overtime the openings will get clogged or at least somewhat distorted. Also as paint builds on the stencil it gets heavier, messier and more difficult to store.
Cleaning:
- After each use or each day of use, clean the stencils.
- If you can,hit them with water at the job site prior to loading them in your truck.
- Back at your home site give them a quick cleaning.
- The basic process is SOFTEN, PEEL, and STORE FLAT.
- Try to soften the paint. For water base paint best practice is to soak the stencils. For larger stencils you can roll them up and put in a drum. After 15 minutes most latex will soften and often it will peel off in sheets. You can help it with a soft nylon bristle brush.
- If the paint has been on for a few days, and is completely cured, it will be more difficult to soften. It does not expand and bubble off of the plastic as much. Really hot water works better and will soften most water based paint that we have worked with. We recommend trying to get the paint soft before becoming more aggressive with the scrapers, and harsher tools.
- Once the paint it soft it will tend to want to peel or flake off. use your hands or a soft bristle brush
- Solvents work but the paint will turn into a tarry, sticky goo and that is also a mess to remove. ( rags and paper towels.)
- Obviously for solvent based paints the appropriate solvent is required. It helps to have a lot of it so you can soak. Use proper gloves, eyewear and protection.
- If the paint is on their hard and soaking is not helping, the task becomes more physical. Also remember that the stencil only really needs to be clean at the openings. Use a scraper of your choice to clean the openings Try to avoid damaging the plastic.
- A light coating of paint on the stencils does not impact them in the slightest. The idea is not a perfectly new stencil but a usable one. Use abrasive pads or scrapers but try not to damage or rough up the plastic.
- Powerwashing can work as well. Aim the spray at an angle to the plastic, use the less harsh nozzles and be careful with pressure. Red nozzles are a no go. We have a customer that swears by a 15 degree yellow nozzle, but we like our green fan nozzle that is 25 degree. (The nozzles are color coded.) The idea is to get cleaning without roughing or tearing the plastic. Our pressure washer gauge is unreliable so start out with low pressue and work up.
- We always clean the stencil prior to storage.
Stencil Ease Team
Why Use Curb Painting Stencils?
Hand-painting numbers and letters on a curb is harder than it looks. Uneven spacing, wobbly lines, and paint bleed can turn a simple project into a frustrating afternoon. Our curb painting stencils take the guesswork out of the process and deliver crisp, uniform results every time.
Here's what makes them worth it:
- Professional appearance: Clean, sharp lines that look like they were done by a pro, even if it's your first time.
- Easy to use: No special skills or tools required. Position, spray or roll, and you're done.
- Affordable: A one-time purchase that pays for itself over and over, especially if you're painting multiple addresses or properties.
- Durable and reusable: Our stencils are built to last through repeated use, so whether you're doing one curb or fifty, they hold up.
Popular Applications
Our curb number stencils are most commonly used for residential address marking, making house numbers visible from the street for delivery drivers, guests, and first responders. But the uses go well beyond that. Contractors and neighborhood painting services use a curb stencil kit for address painting across entire subdivisions in a single weekend. HOAs and property managers rely on them to maintain a consistent, polished look throughout their communities.
Beyond addresses, our collection includes team logos, mascots, custom messages, and decorative designs. These are great for adding school spirit to a driveway edge, marking reserved parking areas, or dressing up commercial properties with branded curb markings.
Common surfaces our stencils work well on include:
- Concrete curbs
- Asphalt
- Brick edging and pavers
- Painted or sealed surfaces
Choosing the Right Curb Stencil
If you're looking to paint a house number on your curb, a curb address stencil is the simplest way to get started. For a more complete setup, especially if you're doing multiple properties or offering curb painting as a service, a curb address stencil kit bundles everything you need into one package.
Not sure which option fits your project? We're happy to help. Our customer service team has been guiding people through material and product selection for over four decades, and they can point you in the right direction quickly.
Browse the Collection
Our curb address stencil options range from basic number sets to full kits and custom designs. Here's a quick look at what's available:
- Numbers & Letters: Individual and full-set curb number stencils for address painting.
- Team Mottos: Show your pride with bold, street-ready text designs.
- Team Mascots: School and sports mascot stencils sized for curb and driveway use.
- Curb Marking Kits: All-in-one kits with stencils and everything you need to get started.
- Create Your Own: Custom stencil options for logos, messages, or unique designs.
Every stencil in this collection is laser-cut at our facility in Old Saybrook, Connecticut, using the same equipment and standards trusted by companies like Amazon, Disney, Costco, and hundreds of municipalities nationwide. Whether you need one curb stencil or a hundred, we've got you covered!