To start marking your boxes, crates, or other shipping surfaces, begin by using Repositionable Spray Adhesive on the back of your stencil. Let the spray adhesive become tacky for about 30 seconds then press the stencil to the surface. If you have used your Oneshot Ink Roller System before the cover should keep the ink pad saturated enough to begin using. If your Oneshot Ink Roller System is new, prime the ink by pressing the silver button 10 times while rolling the ink out onto a scrap piece of paper or cardboard before using with a stencil. Lightly roll the Oneshot Ink Roller System over the stencil until the ink builds into complete coverage. Peel the stencil straight off the box and repeat on the surface of the rest of your boxes.
Stencil Ease offers a variety of shipping stencils for any stenciling need. Make sure to use Repositionable Spray Adhesive on the back of all your stencils before stenciling so that the stencil remains stationary while in use. To fully coat the design in ink it takes about 2-3 coats of light rolling. It doesn't take long to stencil all your surfaces over and over again.
Once you have stenciled all your packages, pop the cover back on your Oneshot Ink Roller System for the next use. The Oneshot Ink Roller System comes in a variety of colors for any need. Now you can mark your shipping and freight surfaces with any design in any color!