Note: Do not make face shield if you or someone in your household is sick, or you believe has been exposed to COVID-19. GATHER TOOLS Disinfectant wipes or spray bottle  Glue Gun with glue sticks Paper towel Rubbing Alcohol or Nail Polish Remover (for cleaning shields) Scissors Sand Paper or nail file Something to protect work surface from glue e.g. piece of cardboard Packing Tape Sharpie  Each Face Shield Kit contains a template for assembly. To print an additional template, click here:  Face Shield Template (Printable)

Health Care Facilities Requesting Face Shields Get Us PPE is a website that provides an interactive map of 3,800 health care facilities requesting PPE donations. Contact location before donating. Click here for our Donation Letter. Click here for #GetUsPPE CITY OF CHICAGORequesting 1 million face shields. Drop off between 9am-3pm, Mon-Fri.Drop off details: United Center, 16 S Wood St, Lot H STATE OF ILLINOISRequesting 2 million face shields. They will distribute to facilities within 24 hours of receipt. Drop off hours:  7am - 7pm dailyShip to or Drop off: CMS State Surplus WarehouseAttn: IEMA-Donations1924 S 10-1/2 Street, Springfield, IL 62703

1.  WATCH TUTORIAL VIDEO 2.  CLEAN Wash hands, using soap & hot water for at least 20 seconds. Clean work-space & tools with disinfectant wipes or spray. 3.  SET UP Put cardboard on work surface to protect it from glue. Place paper template on work surface, with the side to be glued near you. Tape template to work surface, covering the squares where elastic will be glued. This will protect the template. 4.  CUT ELASTIC Cut the elastic into strips for headbands, using the measuring guide at bottom of the template. 5.  SCUFF PLASTIC Scuff up areas to be glued with sandpaper or nail file....